Merging DUA II Guide d'installation télécharger pdf (Page 53)

Peripheral Devices

Workstation Setup Guide • 53

Audio Connections The connections between the Mykerinos audio card, DUA II audio convertor,

and VTR may vary depending on the type of audio equipment and VTR you

have. Use the following illustration and steps as a guideline for connecting the

Mykerinos audio card and audio equipment.

For information on specific port configurations, refer to the documentation

that comes with your DUA II audio convertor, VTR, and Mykerinos audio

card. For a description of the Mykerinos audio card connections, see Card

Placement on page 32.

To connect your audio equipment

1. Make sure that the power switch on the DUA II is in the Off position.

2. Attach the power cord to the power connector at the back of the DUA II,

and plug it into a power outlet.

3. Connect the Optical Output B to ODI In on the DUA II audio convertor.

4. Connect the Optical Input B to ODI Out on the DUA II audio convertor.

5. Connect the audio output ports on the audio convertor to the input ports

on the VTR or audio device.

6. Connect the audio input ports on the audio convertor to the output ports

on the VTR or audio device.

Input

from VTR

Output

to VTR

HD VTR

DUA II

audio convertor

Input

House

sync

Output

To Genlock input on Avid

Equinox Break-Out-Box

There is no external sync connection to the Mykerinos card as

the sync signal is provided by the Avid Equinox PCI card via an

internal connection.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58

Pas de commentaire

Merging DUA II Guide d'installation Page 53